Features: 1. Can be used in various occasions, but generally used in sportswear, shoes,bedding, bags, tents 2. The product is mainly made of polyester, and the cost is relatively low, which is the current market The most widely used and most common Zipper 3. The teeth are spiral, which is a special kind of Zipper series. So there is no single tooth displacement force in its physical indicators 4. Slider painting, electroplating Precautions for use 1. When doing laundry, close the Zipper and fix the Slider; when ironing, the Zipper should be closed, the pull tab should be placed flat to fix the proper position, and the cloth should be placed before ironing
Plastic Zipper
Features
1. It can be used in various occasions, but it is generally used for cold protection clothing,
Down jacket special clothing
2.The product is mainly made of polyoxymethylene, and the cost is between Nylon Zipper and Metal Zippers.
3.The Pearl River Delta region is commonly known as "Plastic Zipper"
4. Commonly used Sliders are painted, and sometimes electroplated
Precautions for use
1. When doing laundry, pull and close the Zipper and fix the Slider.
2. The Zipper is closed, the pull tab is placed flat to fix the appropriate position, and the cloth is placed on it before ironingmetal Zipper
Metal Zipper
Features
1. The most expensive of all Zipper series
2. With copper and aluminum as the main materials, copper can form bronze,nickel, gun and other colors
3. The Slider is mainly electroplating
4. Generally used in pants, jackets, leather clothes, leather shoes (boots), bags
5. It is not suitable for use at the corner, such as when the corner is used to open and close
Product defects caused by existing product characteristics
Precautions for use
1. Long-term exposure to air will form a metal oxide layer on the surface,
Wipe the surface with paper and it will turn black. sometimes on the jacket close to the chain link
There will be chain teeth marks on the fabric, usually copper primary color teeth marks
2. Since the metal Zipper has wax on the surface, the clothing should be placed between the chain teeth and the iron when ironing.
Lining paper is placed between the fabrics to prevent the wax layer from staining the fabric
3. White copper plated products should be stored in a ventilated and dry environment to avoid long-term
Exposure to the air to prevent the oxidation of the coating resulting in the appearance of the fasteners
Slight copper exposure and yellowing
4. Ordinary teeth (round teeth) and Y teeth (square teeth) double-pull products: Among them, Y teeth
The resistance of the directional Zipper is relatively large when it is pulled and closed, and the pulling feeling will be stronger than that of the other side.
The direction is not smooth, so it is generally not recommended to recommend such products to
Customers with higher requirements for pulling
5. When the metal Zipper teeth are oxidized, the color of the tape surface is affected by
A certain degree of damage, so compared with the cloth tape before oxidation, there is a certain degree of damage.
Color difference (usually between grades 3 and 4),
6. Metal chains made of copper alloys (nickel, red copper, brass), prepared in
The chain teeth between different batches of oxidized products on metal wool products are also
There is a certain color difference (usually between grades 3 and 4); the Zipper will
Part of the teeth are blackened due to metal oxidation, which is the skin-cooking agent and
Discoloration caused by bleach dissolving incomplete gas remaining on the product.
7. The sulfide-containing rubber band binds the metal chain, which will cause the chain teeth to produce
Vulcanized (blackened)
8. When washing, close the Zipper and fix the slider to prevent the surface of the Zipper
Paraffin and oily wax are dissolved, affecting the service life
9. When ironing, the Zipper should be closed, and the pull tab should be placed flat and fixed in place.
And put the cloth on it and iron it.
